Yokogawa ZR22S zirconia oxygen detector

.General Introduction

Yokogawa ZR22S zirconia oxygen detector is the explosion-proof probe of separate type zirconia oxygen analyzers, suitable for hazardous areas zone Exd. It works with converter ZR402G or AV550G realize oxygen concentration in combustion exhaust gas and mixed gas, measure range is 0.01 to 21vol% O2. It's applicable for standard pressure 0 to 700℃ and high temperature 700 to 1400℃.

General Specification

Main Characters	Description
Sample Gas Temperature	0 to 700℃, 700 to 1400℃(0.15 m length probe and High Temperature Probe Adapter ZO21P-H)
Sample Gas Pressure	5 to + 250kPa(compensated type recommended exceeds 5kPa)
Oxygen concentration of sample gas	not more than that found in normal air, typically 21vol%
Probe Length	0.15, 0.4, 0.7, 1.0, 1.5, 2.0m
Probe Material	SUS316 (JIS)
Ambient Temperature	-20 to +60℃(-20 to +150°C on the terminal box surface)
Reference Gas System	Instrument Air
Instrument Air System	50kPa + the pressure inside the furnace
Wetted Material	SUS316 (JIS), Zirconia, SUS304 (JIS) or ASTM grade 304 (flange), Hastelloy B, Inconel 600, 601)
Gas Connection:	Rc1/4 or 1/4 NPT (Female)
Wiring Connection	M20 × 1.5, 1/2 NPT
Installation	Flange mounting
Probe Mounting Angle	Horizontal to vertically downward.

3.Model Selection

Model	Suffix Codes										Description
ZR22S											Separate type Explosion-proof Zirconia Oxygen Analyzer, Detector
Explosion-proof Approval	-A										ATEX certified flameproof
	-B										FM certified explosion-proof
	-C										CSA certified explosion-proof
	-D										IECEx certified flameproof
	-Q										EAC with PA certified explosion-proof
	-R										EAC certified explosion-proof
	-K										KOSHA certified explosion-proof
Length		-015									0.15 m (for high temperature use)
		-040									0.4 m
		-070									0.7 m
		-100									1.0 m
		-150									1.5 m
		-200									2.0 m
Wetted material			-S								Stainless steel
Wetted material			-C								Stainless steel with Inconel calibration gas tube
Flange				-A							ANSI Class 150 2 RF
				-B							ANSI Class 150 3 RF
				-C							ANSI Class 150 4 RF
				-E							DIN PN10 DN50 A
				-F							DIN PN10 DN80 A
				-G							DIN PN10 DN100 A
				-K							JIS 5K 65 FF
				-L							JIS 10K 65 FF
				-M							JIS 10K 80 FF
				-P							JIS 10K 100 FF
				-Q							JIS 5K 32 FF (for high temperature use)
				-R							JPI Class 150 4 RF
				-S							JPI Class 150 3 RF
				-W							Westinghouse
					-E						External connection (Instrument air)
Gas Thread						-R					Rc1/4
						-T					1/4NPT(Female)
							-M				M20 x1.5
							-T				1/2 NPT
Instruction manual								-E			English
Instruction manual								-K			Korea
--									-A		Always -A
Options										/C	Inconel bolt
										/CV	Check valve
										/SV	Stop valve
										/SCT	Stainless steel tag plate
										/PT	Printed tag plate

4.Heater Assembly

Model	Suffix Codes			Description
ZR22A				Heater Assembly for ZR22S
Length	-015			0.15 m
	-040			0.4 m
	-070			0.7 m
	-100			1.0 m
	-150			1.5 m
	-200			2.0 m
Jig for change		-A		with Jig
Jig for change		-N		None
Reference gas			-A	Natural convention, External connection (Instrument air)